Opening the lab
When you lower an object into a liquid, the liquid pushes it upwards and the spring balance reading falls. At the same time the object pushes some liquid out of the way. The experiment verifies Archimedes’ principle: it shows that these two things are equal.
The aim in Paper 3 is: to verify Archimedes’ principle.
When an object is wholly or partly immersed in a fluid, the upthrust on it is equal to the weight of the fluid it displaces.
upthrust = weight of fluid displacedIn symbols, for a fluid of density ρ and an immersed volume V: U = ρ g V. In this lab g = 10 N/kg.
Example. 50 cm³ of a block is under water (1000 kg/m³). The upthrust is 1000 × 10 × 0.000050 = 0.5 N.
The block is at rest, so the forces balance: T + U = W. The reading in the liquid is the apparent weight, Wapp = W − U, so U = W − Wapp.
The forces panel on the stage draws these arrows to scale and updates as you lower the block.
The graph is a straight line through the origin with gradient 1, and it has no unit, because both axes are in newtons. A gradient of 1 means U equals the weight displaced.
Archimedes’ principle says the upthrust U equals the weight of liquid displaced, so U is directly proportional to the weight displaced. A block that displaces no liquid feels no upthrust, so the graph must start at (0, 0).
Draw your line of best fit through (0, 0), with the points scattered either side of it. That scatter is human error in reading the balances. If your line misses the origin, the likely cause is a zero error on a balance, such as a top-pan balance that was not set to zero with the empty beaker on it, or a can that was not filled to the spout, so the first liquid displaced never reached the beaker.
This part goes a little beyond what Paper 3 asks, but it helps you understand the principle.
| Precaution | Why |
|---|---|
| Fill the can exactly to the spout first | All the displaced liquid must spill into the beaker. |
| Lower the block gradually | No splashing, so no liquid is lost. |
| Do not let the block touch the bottom or the side | The can would hold up part of its weight and the reading would be too low. |
| Read the balances only when steady | A moving pointer cannot be read. |
| Use a string of negligible weight | It would add to the reading. |
This lab is a model. The block volumes are hidden and built in (aluminium 54 cm³, iron 40 cm³, brass 30 cm³), the spring balance is read to 0.02 N and the pointer bounce is modelled, not measured from a real balance.
His notes list Archimedes’ principle as set in May/June 2017 and May/June 2019, both Paper 3, Question 3. These questions usually ask you to complete a table (the upthrust from two spring balance readings, then the weight of liquid displaced from a mass), plot upthrust against weight displaced, find the gradient, and give precautions and sources of error. The Paper 3 practice tab walks through each of those.