Opening the lab
A converging (convex) lens bends light rays towards each other. Rays that arrive parallel to the axis all pass through one point on the other side, the principal focus, F.
In this lab each lens has a hidden focal length chosen at random. Your job is to find it from readings, not to read it off.
| Object distance | Image |
|---|---|
| u greater than 2f | Real, inverted, smaller. v is between f and 2f. |
| u = 2f | Real, inverted, same size. v = 2f. |
| u between f and 2f | Real, inverted, larger. v is greater than 2f. |
| u = f | No image: the rays leave the lens parallel. |
| u less than f | Virtual, upright, larger, on the same side as the object. It cannot be caught on a screen. |
A real image is one that light really reaches, so a screen can show it. That is why the experiment needs u greater than f.
Here u is the distance from the object to the lens, and v is the distance from the lens to the screen, both in the same unit. This is the real-is-positive form: for a real object and a real image on a screen, u and v are both positive.
Worked example: u = 30 cm and v = 15 cm. Then 1/f = 1/30 + 1/15 = 3/30 = 1/10, so f = 10 cm.
The magnification is m = v ÷ u, which is also image height ÷ object height.
Rearrange the formula: 1/u = −1/v + 1/f. That is a straight line, y = mx + c, with y = 1/u and x = 1/v.
No, and it must not. The graph of 1/u against 1/v is not proportional: 1/u = −1/v + 1/f, so it has the form y = mx + c with a gradient of −1.
The intercept on either axis is 1/f, the one over the focal length. If the line did pass through (0, 0), 1/f would be zero and the focal length would be infinite. So draw the best line through the points, and read the intercept from it.
Finding the sharpest image: the image stays looking sharp over a short stretch of screen travel (the depth of focus). Move the screen until it first goes blurred on each side, then use the middle of the two positions.
Light from a very distant object, such as a tree through a window, arrives almost parallel. The lens brings it to a sharp image at its principal focus. So the distance from the lens to a sharp image of a distant object is about f.
This is quick but rough, because no object is infinitely far away and the sharpest image is hard to judge. The u and v method with a graph is better, because it uses many readings. This lab does not simulate the distant-object method.
| Precaution | Why |
|---|---|
| Lens upright on its holder | A tilted lens does not form the image where the formula says. |
| Lens and screen in line with the scale | Then the distances you read are the real ones. |
| Adjust the screen until the image is sharp | Only a sharp image sits where the rays meet, so only then is the reading v. |
| Nothing in the way of the light | An obstacle changes the image. |
| Several lens positions | One reading could be a fluke. A line of best fit averages out the slips. |
His notes list this experiment as set in January 2020, Paper 3, Question 1. Questions like it usually ask you to complete a table of 1/u and 1/v, plot a graph, read the intercept, and find f. The Paper 3 practice tab walks through each of those.
About this lab: it is a model. The lens formula is exact here, and the depth of focus of about 1 cm is a chosen value, not measured from a real lens.