Opening the lab
Where f is the focal length, u is the object distance and v is the image distance, all measured from the optical centre of the lens.
Rearranged for the image distance, which is what you usually need:
v = uf / (u − f)| Quantity | Positive when |
|---|---|
| f | lens is converging |
| f | negative when diverging |
| u | object is real (always here) |
| v | image is real, on the far side |
| v | negative when the image is virtual |
Magnification has no units, it is a ratio. M > 1 means the image is larger than the object, M < 1 means it is smaller, and M = 1 means they are the same size.
For a single thin lens with a real object, the rule is simple: a real image is always inverted, and a virtual image is always upright.
You only need two rays to locate the image, which is why the diagram here draws rays 1 and 2. Ray 3 is a check: draw it in your exam answer and if all three do not meet at the same point, something is wrong with your construction.
| Object at | Image |
|---|---|
| Beyond 2F | Real, inverted, diminished, between F and 2F |
| At 2F | Real, inverted, same size, at 2F |
| Between F and 2F | Real, inverted, magnified, beyond 2F |
| At F | No image, rays emerge parallel (image at infinity) |
| Inside F | Virtual, upright, magnified, same side as object |
These five are worth learning by heart. They come up in almost every past paper.
A diverging lens is far simpler. Wherever you put the object, the image is always virtual, upright and diminished, and always forms on the same side as the object, between the lens and the focal point.
That is why diverging lenses are used in peepholes and wide-angle viewers: they shrink a wide scene into a small upright picture.