Opening the lab
Point your right thumb in the direction of conventional current. Curl your fingers as if gripping the wire. Your fingers curl the same way the magnetic field circles the conductor.
thumb → current, fingers → fieldThis is also called Maxwell's corkscrew rule: a corkscrew driven in the direction of the current turns the same way as the field.
Since a page cannot show a wire coming toward you, physics uses two symbols for current perpendicular to the page:
In the diagram above, the field pattern is drawn as if you are looking straight down the wire from above. Current flowing up toward you is the dot case; current flowing down away from you is the cross case.
Think of a clock face: current flowing into the face makes the field wrap clockwise. Current flowing out of the face, toward you, makes it wrap anticlockwise.
Reverse the current and the field reverses with it. That is exactly what flipping the terminals does in the demonstration.
The CSEC practical for this topic passes a wire through a horizontal card and places small plotting compasses on the card around it. With no current, every needle points north.
Close the switch, and each needle swings to point tangent to a circle around the wire, all pointing the same rotational way. That is the compass ring shown in the demonstration above.
This grip rule finds the field created by a current. It is a completely different question from Fleming's Left and Right Hand rules, which find the force on a conductor that is already sitting inside someone else's magnetic field.
A CSEC question that gives you a field pattern and asks for the current is the grip rule. One that gives you a field and a moving wire and asks for a force or an induced current is Fleming's.
Coil the wire into a loop and the fields from each turn add up inside the coil, giving a much stronger, more useful field, the basis of every electromagnet.
The rule adapts: curl the fingers of your right hand in the direction the current flows around the loops, and your thumb points to the coil's north pole.
Reverse the current in a solenoid the same way as here, by swapping the terminals, and its north and south poles swap too. This is exactly how a relay or an electromagnetic crane is switched on and off.